Delta-light

Tune. Monitor. Improve.

Maptuner for KTM / HQV / GG bikes

Tune your bike with the new Maptuner

Get ready to experience tuning like never before with the new Maptuner Nano-series from Maptun. Use your smartphone to wirelessly connect to your vehicle and access our world-renowned tuning library. It’s never been easier!

KTM/HQV/GG TPI MODELS 2-STROKE

 Supported models: KTM 150 EXC TPI, 250 XC/EXC TPI, 300 XC/EXC TPI.
Husqvarna TE 150i, TE 250i, TE 300i. Gas Gas EC 250, EC 300. 

• Increased power and torque
• Give your 2-stroke the engine characteristics of a 4-stroke
• Optimized oil supply table for better operational reliability
• Maintain stock MAP-switch control
• Rev limit 10500 rpm
• Activation for testing injectors, coils and fuel pump

Get your tune!
KTM/HQV/GG 4-STROKE

 WITH KEIHIN ECU 796.41.031.000.
NOTE! NON TBI ECU. 

• Increased power throughout the whole rpm range
• Lowered exhaust temperature
• Tuning files for both pump gas and VP Fuel T4 or equivalent
• Increased rev limit with 1000 rpm

Get your tune!
Why choose Maptuner?

Proper re-flash of the ECU
Not a “piggy back”-solution

Safe and non-intrusive
Stock safety systems still intact

Try different tunes
Switch between files in a couple of minutes

Read/clear codes and monitor engine data
Included for an unlimited number of vehicles at no extra cost

Full control
Monitor and log engine data from your smartphone

Not locked to one vehicle
Use your Maptuner for all your rides, you just need a tuning license for each vehicle

Read more and view all tunes
Want to become a dealer? Get in touch!

The Future of

Tuning is Wireless

Meet the Maptuner family

The world’s no.1 programming and diagnostics units for powersport vehicles!

For over 20 years we’ve tuned tens of thousands of snowmobiles, ATV, UTV, marine outboards, watercraft, cars and motorbikes from every corner of the world.

How it works

The Maptuner performs a reflash. In short, the Maptuner first reads the original vehicle firmware to analyze and look up the various parameters such as load pressure, boost, ignition timing, fuel, restrictions etc. These parameters are then adapted to various conditions such as climatic circumstances. This is one of the most advanced ways to optimize the engine – and undoubtedly the safest! 

Maptuner X

The Maptuner X is the all-in-one choice for professionals and workshops with its built-in touchscreen and powerful hardware. Its large storage makes it a perfect fit for people working with a large number of vehicles. The Dealer Service Application is specifically developed with pro users in mind to speed up their workflow. Requires a PC with MyMaptuner software to sync with our servers.

Maptuner Nano

The Maptuner Nano-series is the latest innovation in automotive and powersports technology. Created by taking all our knowledge and technology and putting it into a sleek and compact device controlled wirelessly with your smartphone and MyMaptuner App.

Compare Maptuners

Apps

Whichever Maptuner you choose it easily plugs into your vehicle and opens up endless possibilities for tuning, monitoring and improving your ride to your liking thanks to our apps. The apps Monitoring and Fault Codes Manager are all included with all Maptuners and can be used for any vehicle (no need for a license). The powerful Datalogger app that allows you to analyze engine data is included with your tuning license. We continue to develop more apps all the time.

World-Renowned Tuning Library

Experience a newfound thrill behind the wheel or handlebars as the Maptuner enhances your vehicle’s performance. Whether you’re seeking improved fuel efficiency, smoother acceleration or a boost in horsepower, our cutting-edge technology delivers results. The Maptuner-series are fully compatible with all tuning software available from Maptun. An extensive library or tunes that keeps on growing!

Visit maptunpowersports.com

Available tuning and features for KTM/HQV/GG bikes

The results are not only felt. They are proven in testing sessions in the dyno and on the trails over several months. The power and torque is increased significant and throughout the whole RPM-range. We’ve also optimized the oil supply table in our tunes for better operational reliability. But the most important thing is how it feels and performs in the real-world. The Maptun “signature dish” is perhaps the undeniable drivability. One of our test riders says:

“The power delivery is smooth and responsive even at part throttle. And the boost in power and torque in the mid-range is remarkable! It’s like having the lightness and agility of the 2-stroke and bringing the engine characteristics from a 4-stroke.”

KTM/HQV/GG TPI MODELS 2-STROKE
Maptuner X (TX2A) or Maptuner Nano (NX3A) are compatible with this vehicle with cable 01-MT055. Buy the tuning bundle with Maptuner Nano, cable and tuning license here.

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Activation

To further assistmore advanced users in troubleshooting we’ve created the Activation App. In this app you can send a signal to the injectors, coils or fuel pump to test them. If they are responding correctly, they will create a humming sound. All can be tested individually. 

Included files

Stock file

Return ECU to factory settings.

Stage 1

95/91 petrol file, use premium fuel for optimum performance. Compatible with both stock and FMF-exhaust. 

Get your tune!

KTM/HQV/GG 4-STROKE MODELS
WITH KEIHIN ECU 769.41.031.000. NOTE! NON TBI ECU.
Maptuner X (TX2A) or Maptuner Nano (NX3A) are compatible with this vehicle with cable kit 01-MT055. Buy the tuning bundle with Maptuner Nano, cable and tuning license here.

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Activation

To further assistmore advanced users in troubleshooting we’ve created the Activation App. In this app you can send a signal to the injectors, coils or fuel pump to test them. If they are responding correctly, they will create a humming sound. All can be tested individually. 

Included files

Stock file

Return ECU to factory settings.

Stage 1 93/98 petrol or VP T4

93/98 petrol file or VP T4 (or equivalent). Compatible with both stock and aftermarket exhaust. 

Stage 1 ETS MX21

ETS MX21 (or equivalent). Compatible with both stock and aftermarket exhaust. 

Stage 1 93/98 petrol or VP T4 (ONLY FOR 500 MODELS)

93/98 petrol file or VP T4 (or equivalent). Require slip on exhaust and removal of air box reed.

Get your tune!

All tuning files are included with your tuning licence and you can reflash your ECU with the Maptuner at any time with a different file.

About us

For over 20 years Maptun has specialized in developing both software and hardware for the automotive and powersports industry. Carefully refining every part of the tuning process. Never settling for anything less than optimum. Because we simply don’t believe in taking shortcuts. 

Get a quote!

(Optional)