Tim Nordlöf

24Sep

MyMaptuner App Update 1.16.4

September 24, 2024 Tim Nordlöf 56

New features
With Firmware Update 39 we introduced a number of new features that’s included in the app with this version (1.16.4)

DESS keys (purchased separately)
Reset Service (purchased separately)
Reset TPS (included with tuning license)
Reset History (purchased separately)

Updated or added functionality

New page for reporting bugs
The MyMaptuner App now warns the user if a vehicle has status set to ’Locked’
Numerous bug fixes and general improvements to the app

24Sep

Maptuner Nano Firmware Update 39

September 24, 2024 Tim Nordlöf 54

Firmware update applies to models NX3 & NB3 (all revisions). NB3 is only compatible with BRP-vehicles (Can-Am, Lynx, Sea-Doo and Ski-Doo).

Added vehicle support

Segway/CF Moto MSE8.0 support for Programming, Fault Codes Manager, Datalogging and Monitoring.
KTM SH72531 support for Programming and Fault Codes Manager.
Kawasaki support for our CAN lambda module
Seadoo support for Reset Supercharger maintenance (for older Bosch-models)

Updated or added functionality

MG1 Programming and MG1 Config are now simplified and with added security
Segway/CF Moto improvements
Improved management of inactive, but connected, vehicles

New features
Support for the new service features with MyMaptuner App Update 1.16.4 (länk till inlägg).

DESS keys (purchased separately)
Reset Service (purchased separately)
Reset TPS (included with tuning license)
Reset History (purchased separately)

Bug fixes

Throttle reset – Improved security
A lot of small improvements for better usability

24Sep

MaptunerX Firmware Update 01030101

September 24, 2024 Tim Nordlöf 56

Added vehicle support

Segway/CF Moto – MSE8.0 now supports Programming, Fault Codes Manager, Datalogging/Monitoring and Activations.
KTM SH72531 support for Programming and Fault Codes Manager.
Kawasaki support for our CAN lambda module
Sea-Doo support for Reset Supercharger maintenance (for older Bosch-models)

19Jun

MyMaptuner App Update 1.13.0: Reset TPS

June 19, 2024 Tim Nordlöf 96

Introducing the Reset Throttle (TPS / Throttle Position Sensor) feature in the app. This is a popular feature for Maptuner X users which is now available for Maptuner Nano users (both NB3 and NX3 versions). As of now this works on all vehicles equipped with the following ECUs: Bosch ME 17.8.5, Bosch MG1 (Sea-Doo 2024), Ski-doo/Lynx E-TEC and Siemens MSE 3.7.
Bugfixes and tweaks

Download or update your app for iOS and Android.

18Jun

Maptuner Nano (NX3 & NB3) Firmware Update 37

June 18, 2024 Tim Nordlöf 93

New features

NB3 only: Added SCOM (Speed Control Override Module) to all Sea-Doo 325 watercrafts (all regions, not only US/CA. This is a plug-and-play feature that removes the speed limiter on the watercraft when the Maptuner Nano NB3 is connected. You don’t need to reflash the ECU but your Maptuner Nano NB3 needs to run this firmware version (37) or newer for this feature to work.
Both NB3 and NX3: Fault Codes Manager, Monitoring and Start in Sport Mode is now available for Sea-Doo 325 with any Maptuner Nano running the latest firmware (does not require a tuning license).

Update firmware using the MyMaptuner App for iOS or Android.

16Apr

MyMaptuner App Update 1.11.1

April 16, 2024 Tim Nordlöf 99

Major improvements in Bluetooth speed together with firmware version 34.The sync process is about twice as fast as before.
Improved user interface for tablets
Bugfixes and tweaks

16Apr

Maptuner Nano (NX3 & NB3) Firmware Update 34

April 16, 2024 Tim Nordlöf 89

Improvements:

Improvements and bug fixes for MG1 diagnostics
Major improvements in Bluetooth speed (see MyMaptuner App 1.11.1)

06Mar

MyMaptuner App Update 1.9.2

March 6, 2024 Tim Nordlöf 96

Security update – Improved connection security between Maptuner and app.
Repair function – In recovery mode, the new repair function can restore the Maptuner to a previous state in case something would go wrong.
UI tweaks
Bugfixes

06Mar

Maptuner Nano (NX3A & NB3A) Firmware Update 31

March 6, 2024 Tim Nordlöf 73

New features:

MG1 Preparations

Improvements:

Yamaha YXZ diagnostic fix
KTM Keihin improvements of fault code manager and reading/writing
CF Moto / Segway MSE 6.0 Improved datalogging
Ski-Doo improved fault code manager

Other changes

New naming convention for our firmware versions from now on. This is officially version 31 (instead of 001F).

05Mar

Important Announcement: Upcoming Maptuner Nano Firmware Update

March 5, 2024 Tim Nordlöf 66

Action required.

We’re excited to announce an upcoming firmware update for the Maptuner Nano (NX3A and NB3A) that focuses on enhancing security measures to safeguard against unauthorized access.

Here’s what you need to know:

Enhanced Security Features: The new firmware will introduce robust security enhancements to prevent unauthorized users from connecting to Maptuner Nano devices, ensuring your device and data remain protected.
Automatic Installation: The firmware update will be seamlessly integrated into your Maptuner Nano experience. It will automatically download and install during your next sync.
Action Required After Installation: Following the installation of the firmware update, it’s important to note that you will need to forget your previously known Maptuner Nano devices before adding them again. This step is crucial to ensure compatibility and optimal performance post-update. Follow the instructions by pressing the button below:

How to forget known Maptuner Nano devices

We’re committed to providing you with the best-in-class security measures and user experience. Thank you for your continued support and cooperation as we strive to enhance the functionality and security of the Maptuner Nano.