Delta-light

Tune. Monitor. Improve.

Maptuner for Sea-Doo watercraft

Tune your ski with the new Maptuner

Get ready to experience tuning like never before with the new Maptuner Nano-series from Maptun. Use your smartphone to wirelessly connect to your vehicle and access our world-renowned tuning library. It’s never been easier!

Sea-Doo 325 (2024-)

RXT-X RS 325, RXP-X RS 325

• Instant SCOM-support (Speed Limit Removal)
• Start in Sport Mode
• Want even more performance? Use the MG1 unlocking service to enable ECU reflashing.
• Choose between three different tunes depending on your hardware setup
• Diagnostic features

Get your tune!
Speed Limit Removal
Sea-Doo 130/170 (2020-)

GTI 130, GTX 130, GTI 170, GTX 170, Wake 170

• 100kmh+ top speed
• Start in Sport Mode
• Enable VTS
• Diagnostic features

Get your tune!
Sea-Doo 300-models (-2023)

RXP-X 300, RXT-X 300, GTX 300

• Instant SCOM-support
• Start in Sport Mode
• Choose between normal or aggressive timing and TPS
• Diagnostic features

Get your tune!
Sea-Doo Spark

Spark 60, Spark 90, Spark Trixx

• Tuning software for petrol, E85 and race fuel
• Tuning software for turbo kit
• Choose between normal or aggressive timing and TPS
•  Diagnostic features

Get your tune!
Why choose Maptuner?

SCOM
Instant SCOM when connected to supported vehicle.

Safe and non-intrusive
Stock safety systems still intact

Try different tunes
Switch between files in a couple of minutes

Wide range of service features
Such as reading/clearing fault codes, managing keys, resetting history etc. (4)

Full control
Monitor and log engine data from your smartphone

The perfect fit for BRP
Direct connect to the diagnostics port of your Sea-Doo without cables or adapters

Read more and view all tunes
Want to become a dealer? Get in touch!

The Future of

Tuning is Wireless

Meet the Maptuner family

The world’s no.1 programming and diagnostics units for powersport vehicles!

For over 20 years we’ve tuned tens of thousands of snowmobiles, ATV, UTV, marine outboards, watercraft, cars and motorbikes from every corner of the world.

How it works

The Maptuner performs a reflash. In short, the Maptuner first reads the original vehicle firmware to analyze and look up the various parameters such as load pressure, boost, ignition timing, fuel, restrictions etc. These parameters are then adapted to various conditions such as climatic circumstances. This is one of the most advanced ways to optimize the engine – and undoubtedly the safest! 

Maptuner X

The Maptuner X is the all-in-one choice for professionals and workshops with its built-in touchscreen and powerful hardware. Its large storage makes it a perfect fit for people working with a large number of vehicles. The Dealer Service Application is specifically developed with pro users in mind to speed up their workflow. Requires a PC with MyMaptuner software to sync with our servers.

Maptuner Nano

The Maptuner Nano-series is the latest innovation in automotive and powersports technology. Created by taking all our knowledge and technology and putting it into a sleek and compact device controlled wirelessly with your smartphone and MyMaptuner App.

Compare Maptuners

Apps

Whichever Maptuner you choose it easily plugs into your vehicle and opens up endless possibilities for tuning, monitoring and improving your ride to your liking thanks to our apps. The apps Monitoring and Fault Codes Manager are all included with all Maptuners and can be used for any vehicle (no need for a license). The powerful Datalogger app that allows you to analyze engine data is included with your tuning license. We continue to develop more apps all the time.

World-Renowned Tuning Library

Experience a newfound thrill behind the wheel or handlebars as the Maptuner enhances your vehicle’s performance. Whether you’re seeking improved fuel efficiency, smoother acceleration or a boost in horsepower, our cutting-edge technology delivers results. The Maptuner-series are fully compatible with all tuning software available from Maptun. An extensive library or tunes that keeps on growing!

Visit maptunpowersports.com

Available tuning and features for Sea-Doo Watercraft

For RXP-X RS 325, RXT-X RS 325

Sea-Doo 325-models
Maptuner X and Maptuner Nano (NX3) is compatible with this vehicle together with cable 01-MT013. Maptuner Nano (NB3) is direct compatible with this model, no additional cable is required. Maptuner Nano NB3 will SCOM immediately when connected to a Sea-Doo 325, even without a tuning license as long as the Maptuner is running firmware version 37 or later. You can easily update the firmware using MyMaptuner App for iOS or Android. 

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Start in Sport Mode

Enable Start in Sport Mode.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Reset TPS

Calibrate your TPS-sensor.(2)

Hi (Start message)

Change your welcome message in cluster. *Only for certain models, contact Maptun for assistance. Only compatible with MaptunerX TX2A

Optional apps

MG1 Configuration (required to unlock ECU)

This app will be automatically enabled on our MG1- vehicle once tuning license has been assigned. It’s used to transfer vehicle data from old ECU to your new unlocked ECU.

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Dess Key Management

Add, remove or change your DESS Keys. (3)

Reset Service

Reset your service reminder. Only for Maptuner X (TX2A).

Reset History

Wipe out the memory that contains peak values of rpm, boost, temperature etc.

Included files

Stock file

Reset vehicle to factory settings.

Stage 1

84 MPH GPS @ 8700 RPM W 13/18
Compatible with stock hardware.
No Speed Limitation.
Tune RPM Limit: 8800 rpm.
Compatible with both race and pump gas.

Stage 2

Compatible with both race and pump gas.

Stage 3

Compatible with both race and pump gas.

For RXP-X 300, RXT-X 300, GTX 300 etc.

Sea-Doo 300-models (-2023)
Maptuner X (TX2A) and Maptuner Nano (NX3A) is compatible with this vehicle together with cable 01-MT013. Maptuner Nano (NB3A) is direct compatible with this model, no additional cable is required. NB3A will start to SCOM immediately when connected to a Sea-Doo 260/300, even without a tuning license. 

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Reset TPS

Calibrate your TPS-sensor.(2)

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Dess Key Management

Add, remove or change your DESS Keys. (3)

Reset Service

Reset your service reminder. Only for Maptuner X (TX2A).

Reset History

Wipe out the memory that contains peak values of rpm, boost, temperature etc.

Included files

Stock file

Reset vehicle to factory settings.

Stage 1

Compatible with stock hardware. For optimum performance use 93/98 petrol.

Stage 1 AGR

Compatible with stock hardware. For optimum performance use 93/98 petrol.

Stage 2

Compatible with cold air intake. For optimum performance use 93/98 petrol.

Stage 2 AGR

Compatible with cold air intake.Recommended to be used with 93/98 petrol. Aggressive timing and throttle response. 

Stage 3 AGR

Compatible with cold air intake, VT11-injectors, XX-Supercharger. Recommended to be used with 93/98 petrol.Aggressive timing and throttle response. 

Stage 4

Compatible with cold air intake, VT11-injectors, XXX-Supercharger, RIVA RACING Camshaft. Recommended to be used with 93/98 petrol.

Stage 4 AGR

Compatible with cold air intake, VT11-injectors, XXX-Supercharger, RIVA RACING Camshaft. Recommended to be used with 93/98 petrol. Aggressive timing and throttle response.

Get your tune!

For GTI 130, GTX 130, GTI 170, GTX 170, Wake 170 etc.

Sea-Doo 130/170 (2020-)
Maptuner X (TX2A) and Maptuner Nano (NX3A) is compatible with this vehicle together with cable 01-MT013. Maptuner Nano (NB3A) is direct compatible with this model, no additional cable is required. 

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Reset TPS

Calibrate your TPS-sensor.(2)

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Dess Key Management

Add, remove or change your DESS Keys. (3)

Reset Service

Reset your service reminder. Only for Maptuner X (TX2A).

Reset History

Wipe out the memory that contains peak values of rpm, boost, temperature etc.

Included files

Stock file

Reset vehicle to factory settings.

Stage 1

Compatible with stock hardware. For optimum performance use 93/98 petrol.

Stage 2

Compatible with cold air intake. For optimum performance use 93/98 petrol.

Get your tune!

For Spark 60, Spark 90, Spark Trixx etc.

Sea-Doo Spark/Trixx
Maptuner X (TX2A) and Maptuner Nano (NX3A) is compatible with this vehicle together with cable 01-MT013. Maptuner Nano (NB3A) is direct compatible with this model, no additional cable is required. 

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Reset TPS

Calibrate your TPS-sensor.(2)

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Dess Key Management

Add, remove or change your DESS Keys. (3)

Reset Service

Reset your service reminder. Only for Maptuner X (TX2A).

Reset History

Wipe out the memory that contains peak values of rpm, boost, temperature etc.

Included files

Stock file

Reset vehicle to factory settings.

Stage 1

Compatible with stock hardware. For optimum performance use 93/98 petrol.

Stage 1 E85

Compatible with stock hardware. For E85 fuel.

Stage 2

Compatible with cold air intake. For optimum performance use 93/98 petrol.

Stage 2 E85

Compatible with cold air intake. For E85 fuel.

Stage RACE Petrol

Race file for petrol with increased limiters to prevent limp mode during racing. Aggressive timing and throttle response. For 93/98 petrol.

Stage RACE E85

Race file for E85 with increased limiters to prevent limp mode during racing. Aggressive timing and throttle response. 

Get your tune!

For Wake Pro 230, RXT 230, GTC 230, GTR-X 230, GTX 230 etc.

Sea-Doo 230-models
Maptuner X (TX2A) and Maptuner Nano (NX3A) is compatible with this vehicle together with cable 01-MT013. Maptuner Nano (NB3A) is direct compatible with this model, no additional cable is required. 

Included apps

Fault Codes

Read and clear fault codes recorded by your ECU.

Monitoring

Being able to see different engine values in real time while driving is something many people find as highly valued and that is why we have created the Monitoring app that shows you all the information you need to be sure that your vehicle is performing as it should.  Values being showed and available features varies between different kinds of vehicles. An example of values shown is boost pressure, air mass, speed, oil pressure and oil temperature. Display values both graphically and numerically.

Datalogger

Allows you to record the values for analysis afterwards. Datalogger gives a deeper analysis on the function on the engine than the standard gauges of your vehicle. The Map Editor PC-software allows you to modify the software of your vehicle after analysing the values in the Datalogger app.

Reset TPS

Calibrate your TPS-sensor.(2)

Start in Sport Mode

Start your ski in Sport Mode by default.

Optional apps

Map Editor

Windows PC software. Allow you to make changes to maps in our tuning library. Edit values like:
– Ignition advance
– Fuel map
– Boost
– RPM Limiter
Tables depends on model and software version.
We strongly recommend that you combine this with Maptuner X Datalogger Kit and external sensors.

Dess Key Management

Add, remove or change your DESS Keys. (3)

Reset Service

Reset your service reminder. Only for Maptuner X (TX2A).

Reset History

Wipe out thememory that contains peak values of rpm, boost, temperature etc.

Included files

Stock file

Reset vehicle to factory settings.

Stage 1

Compatible with stock hardware. For optimum performance use 93/98 petrol.

Stage 2

Compatible with cold air intake. For optimum performance use 93/98 petrol.

Stage 3 XX

Compatible with cold air intake, injectors, camshaft and upgraded supercharger. For 93/98 petrol.

Get your tune!

All tuning files are included with your tuning licence and you can reflash your ECU with the Maptuner at any time with a different file.

For more models visit www.maptunpowersports.com

1) Hi app is only available for Maptuner X (TX2A).
2) Reset TPS is only available for Maptuner X (TX2A).
3) Manage DESS-keys in only available for Maptuner X (TX2A).
4) Reset service is only available for Maptuner X (TX2A).

About us

For over 20 years Maptun has specialized in developing both software and hardware for the automotive and powersports industry. Carefully refining every part of the tuning process. Never settling for anything less than optimum. Because we simply don’t believe in taking shortcuts. 

Get a quote!

(Optional)

Main menu

  • Maptuner Nano
  • Maptuner X
    • Design
    • Apps
    • Dealer Service Application
    • Technical information
  • Tuning
  • Support

Distribution

  • Tuning Libraries
  • Become a Maptun Dealer

Support

  • Support Home
  • ECU permissions
  • Cable Compatibility
  • Compatible Maptuner Apps
  • Contact
  • Downloads
  • Getting started